Cart 0

GDS Racing 50T Hard Steel Spur Gear 50 Tooth RC Monster Truck Traxxas X-MAXX 1/5

  • $ 2400

Number of Teeth: 50
Pitch: 1 Mod
Thickness: 8mm
Diameter: 2" (52mm)


  • Do NOT use the pin system for setting the X-Maxx gear mesh. Please manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.

We Also Recommend